Home>Products>デュエルビッツブックメーカーheet andデュエルビッツ 入金方法od Formability Copper Alloy CAC™ 75
デュエルビッツ 入金方法od Formability Copper Alloy CAC™ 75
デュエルビッツ 入金方法od electrical conductivity
Excellent stress relaxation resistance and Good bend formability.
Good Points
- Has higher strength than 750MPa, デュエルビッツ 入金方法an use for small terminals suitably.
- Has high yield strength, equivalent to low bdellium copper alloys.
- Has about 3 times electrical conductivity of phosphorous bronze.
- Has excellent bend formability, which contributes to flexibility in designing due to smaller anisotropy.
- Has excellent stress relaxation resistance and is suitable for the automotive applications.
Nominal Compositions
Cu-2.5Ni-0.55Si-1.0Zn-0.2Sn (mass%)
Characteristics
Fig. Stress Relaxation Resistance of CAC™ 75.
1. Physical Properties
Specific Gravity | 8.9 |
---|---|
Coefficient of Thermal Expansion (293~573K) |
17.6 x 10-6/K |
Thermal Conductivity (293K) | 166 W/m.K |
Electrical Resistivity (293K) | 43.1 nΩ.m |
Electrical Conductivity (293K) | 40 %IACS |
Modulus Elasticity (293K) | 127 GPa |
* The above are typical characteristics.
2. Mechanical Properties
Temper |
Tensile Strength MPa |
Yield Strength MPa |
Elongation % |
Vickers Hardness MHv: 4.9N |
---|---|---|---|---|
H | 700~850 | 730 | 5 min | 210~260 |
* Yield strength are nominal values.
* The above tensile strength and hardness are our standard specifications.
We will adjust these specifications by your requests.
3. 90°W-type Bend-formability (MBR)
Temper | Good Way | Bad Way |
---|---|---|
H | 0.5 | 0.5 |
* The above are typical characteristics.
The value slightly varies depending on the thickness of specimens.
Use
Small terminals デュエルビッツ 入金方法onnectors for Automotive wire harness, Terminals デュエルビッツ 入金方法onnectors for Consumers etc.
Others
Not used cadmium (Cd), lead (Pb), mercury (Hg), six value chrome (Cr+6), polybrominated biphenyl (PBB), Polybrominated biphenyl ether (PBDE) restricted with RoHS etc.
Kobe Steel, Ltd. Advanced Materials Business
Copper Rolled Products Unit
Copper Flat Rolled Products Sales Department