Home>Products>デュエルビッツブックメーカーheet andデュエルビッツ 入金方法us Bronze for Terminals and Connectors KLF™-5
デュエルビッツ 入金方法us Bronze for Terminals and Connectors KLF™-5
CDA No. 50715
Good bend-formability, spring limit and electrical conductivity for Terminals and Connectors.
The KLF™-5 has small amount of iron, phosphorus and tin in chemical compositions, and is デュエルビッツ 入金方法ous Bronze produced with hot rolled process. Hardened by Fe2 precipitates in copper matrix and has good electrical conductivity in comparison to normal Phosphorous Bronze. KLF™-5 is the improvement デュエルビッツ 入金方法ous Bronze of low cost.
Good Points
- デュエルビッツ 入金方法oftening resistance. It is 100 degree higher than phosphorous bronze in stress relaxation.
- Has good electrical and thermal conductivity. It is 40 to 50% higher than brass or phosphorous bronze.
- デュエルビッツ 入金方法trength and equipment of phosphorous bronze.
- デュエルビッツ 入金方法olderability and platability.
- デュエルビッツ 入金方法tress corrosion cracking resistance and is better than phosphorous bronze.
Nominal Compositions
Cu-2.0Sn-0.1Fe-0.03P (mass%)
Characteristics
Fig. Stress Relaxation Resistance of KLF™-5.
1. Physical Properties
| Specific Gravity | 8.9 |
|---|---|
| Coefficient of Thermal Expansion (293～573K) |
17.6 x 10-6/K |
| Thermal Conductivity (293K) | 150 W/m.K |
| Electrical Resistivity (293K) | 49.3 nΩ.m |
| Electrical Conductivity (293K) | 35 %IACS |
| Modulus Elasticity (293K) | 123 GPa |
* The above are typical characteristics.
2. Mechanical Properties
| Temper | Tensile Strength MPa |
Yield Strength MPa |
Elongation
% |
Vickers Hardness MHv: 4.9N |
|---|---|---|---|---|
| 1/2H | 440～540 | 450 | 8 min | 140～180 |
| H | 530～640 | 530 | 5 min | 160～200 |
* Yield strength are nominal values.
* The above tensile strength and hardness are our standard specifications.
We will adjust these specifications by your requests.
3. 90°V-type Bend-formability (MBR)
| Temper | Good Way | Bad Way |
|---|---|---|
| 1/2H | 0 | 0 |
| H | 0 | 0 |
* The above are typical characteristics.
The value slightly varies depending on the thickness of specimens.
Use
Terminals and connectors for Automotive, Small terminals and connectors for Consumers etc.
Others
Not used cadmium (Cd), lead (Pb), mercury (Hg), six value chrome (Cr+6), polybrominated biphenyl (PBB) , Polybrominated biphenyl ether (PBDE) restricted with RoHS etc.
Kobe Steel, Ltd. Advanced Materials Business
Copper Rolled Products Unit
Copper Flat Rolled Products Sales Department
