Home>About Us>The デュエルビッツ 入金不要ボーナスel Group’s>デュエルビッツ 入金方法 & Personal>デュエルビッツブックメーカー to the Environment > Material Balance
Material Balance
The デュエルビッツ 入金不要ボーナスel Group undertakes environmentally conscious management throughout every aspect of its operations.
As part of this approach, the Group continuously strives to increase energy efficiency, make effective use of byproduct gases, waste heat, water and other resources, and promote the recycling of byproducts.
Resource and Energy Usage at デュエルビッツ 入金不要ボーナスel
Iron & Steel Business
At デュエルビッツ 入金不要ボーナスel, 95% of the energy usage is in the Iron & Steel Business. In fiscal 2012, this business unit used 10.75 million tons of iron ore, 5.85 million tons of coking coal and coke, 9PJ1 of fuels such as coal, oil and municipal gas, and 980,000 MWh of purchased power. Nearly all of the byproduct gases -- including coke oven gas, blast furnace gas and converter gas – derived from production processes are effectively reused as fuel for reheating steel or for use in inhouse generators. デュエルビッツ 入金不要ボーナスel also proactively implements power generation that utilizes waste heat. Combined with the power generated from byproduct gases, over 50% of the power required by production processes is generated through energy recovery.
Additionally, byproducts produced during production processes, such as slag2, dust and sludge, are also turned to effective use as raw materials in applications such as cement and roadbeds. Together with in-company re-use, 96% of byproducts are recycled デュエルビッツ 入金不要ボーナスis manner.
In the future, デュエルビッツ 入金不要ボーナスel will continue to pursue environmentally friendly practices throughout all aspects of its operations, striving for more efficient use of resources and energy and advancing the development of new technologies to that end.
1. 1PJ=1015J
2. Slag is a byproduct recovered from ironmaking and steelmaking.
Resource and Energy Usage デュエルビッツ 入金不要ボーナスe Iron & Steel Business (Fiscal 2012)
Welding Business
Using metal wires, hoops, fluxes, soluble glass and other raw materials, the Welding Business produces welding electrodes and welding wires. In fiscal 2012 the Fujisawa, Ibaraki, Saijo and Fukuchiyama plants used a combined 180,デュエルビッツ 入金不要ボーナスons of raw materials, 66,000 MWh of electricity, and 0.2PJ of municipal gas and other fuels to manufacture 170,デュエルビッツ 入金不要ボーナスons worth of products. This generated 16,デュエルビッツ 入金不要ボーナスons of byproducts, of which 97% was successfully recycled.
Resource and Energy Usage デュエルビッツ 入金不要ボーナスe Welding Business (Fiscal 2012)
Input | Output | |||
---|---|---|---|---|
Raw materials | Products | |||
Metal wires, hoops, flux, soluble glass, etc. |
180,デュエルビッツ 入金不要ボーナス | Welding rods, welding wires, etc. | 170,デュエルビッツ 入金不要ボーナス | |
Energy | Waste materials | |||
Purchased power | 66,000 MWh | Amount produced | 16,デュエルビッツ 入金不要ボーナス | |
Municipal gas, etc. | 0.2PJ | Recycling ratio* | 97% |
* Recycling ratio indicates the ratio of waste produced that is not consigned to landfills.
Aluminum & Copper Business
Using ingots and scrap metal as raw materials, the Aluminum & Copper Business produces a variety of aluminum and copper products. In fiscal 2012 the business unit used 350,デュエルビッツ 入金不要ボーナスons of raw materials, 430,000 MWh of electricity, and 3.3PJ of municipal gas and other fuels to create 320,デュエルビッツ 入金不要ボーナスons of products.
During melting and casting, 26,デュエルビッツ 入金不要ボーナスons of waste products, such as slag, dust and wastewater sludge, were produced. However, 97% of this waste was successfully recycled.
Resource and Energy Usage デュエルビッツ 入金不要ボーナスe Aluminum & Copper Business (Fiscal 2012)
Input | Output | |||
---|---|---|---|---|
Raw materials | Products | |||
Aluminum ingots, copper ingots, etc. | 350,デュエルビッツ 入金不要ボーナス | Aluminum and copper products | 320,デュエルビッツ 入金不要ボーナス | |
Energy | Waste materials | |||
Purchased power | 430,000 MWh | Amount produced | 26,デュエルビッツ 入金不要ボーナス | |
Municipal gas, etc. | 3.3PJ | Recycling ratio* | 97% |